Overview
We manufacture HDPE Woven Geomembrane Since the year 2008. The product is used to line the pond bed to prevent seepage in the ground. HDPE woven pond liners are manufactured as per IS 1535:2015 in Type I (300mic) Type II (500 mic) &Type III (750 mic) as mentioned in the standard (table of standard).
Services
- We provide guidance of setting up of pond bed by means of site photography & videography diagrams.
- We provide end to end service of laying & installation of the Geomembrane on the bed.
Brands
HDPE Woven Pond Liners ( as per mentioned in IS 15351 )
| BRAND | MICRON | TYPE | MAX. WIDTH in FEET | WARRANTY |
| CROCLINER | 500 | II | 9 | 5 Years |
| AQUALINER | 300 | I | 9 | 3 Years |
| AQUALINER | 500 | II | 6 | 5 Years |
| AQUALINER | 750 | III | 6 | 7 Years |
Channels
B2B involving Governmental Subsidy and registration in various Agriculture / Horticulture Departments.
We supply pond liners through rate contract, subsidy schemes, Direct Beneficiary Transfer (DBT) of various State Departments of Agriculture & Horticulture List of RCs & tenders awarded to our companies are as follows, successfully supplied under:| Company | Departmental | City / State | Schemes |
| MP State Agro Industries Corporation Limited | Horticulture Dept. | Bhopal | RCO for Supply of Plastic Items. |
| Government of Rajasthan – Commissionerate of Agriculture | Joint Director Of Agriculture (WUC) | Jaipur – Raj. | For Diggi & Farm |
| Government of Karnataka | Commissionerate of Agriculture Department | Banglore | Krishi Bhagya Scheme |
| Maharashtra State Horticulture & Medical Plant Board | MSHMPB | Pune – Mah. | supply of reinforced laminated woven geomembrane film |
Private Sector
Our brands (AL&CL) add in brands that have a strong hold in the following markets of india.
Brands
Distributor Network
Quality Control
We adhere our quality parameters as per IS 15351
| Sr. No. | Properties | Requirement | Method of Test | |
| Type-I | Type-II | |||
| 1 | Thickness (MM), Min | 0.25 | 0.5 | IS:7016(Part-1) |
| 2 | Mass(g/m2), min | 250 | 420 | IS:7016(Part-1) |
| 3 | Dimension (Length/ Width) | 1% | 1% | Annex A of IS:11652 |
| 4 | Carbon Black content, Percent | 2.5 _+ 0.5 | 2.5_+ 0.5 | IS:2530 |
| 5 | Breaking load on 20x10cm step n min before UV Exposure | Warp-3300N Weft- 3000N | Warp-6600N Weft- 6000N | IS:13162(Part-5) |
| 6 | Stain at Maximum load percent | 20+-5 | 20+-5 | IS:13162(Part-5) |
| 7 | Breaking load on 20x10cm step n min after UV Exposure of 1000h for wrap and weft | 80% of the Original actual Value | 80% of the Original actual Value | Annex B and IS: 13162 (Part 5) |
| 8 | Impact failure load at 1524 mm drop min, gram force at 50 percent failure | 1190 | 1840 | Annex- C |
| 9 | Tear Resistance, N , Min | 100 | 250 | Method A1 of IS 7016 (part 3) |
| 10 | Puncture Resistance , N, Min | 300 | 500 | Annex – D |
| 11 | Bursting strength ( ball burst) N/cm2, Min | 60 | IS: 7016 (part 6) | |
| 12 | Seam strength Before UV exposure N/mm) Min | 15 | 30 | IS: 15060 |
| 13 | Seam strength After UV exposure N/mm) Min | 80% of the Original actual Value | 80% of the Original actual Value | Annex -B, IS: 15060 |
| 14 | Hydrostatic resistance | No leakage at 10gk/cm2 | No leakage at 15gk/cm2 | Annex- E |
| 15 | Hydrostatic resistance after UV exposure of 1000h | 80% of the Original actual Value | 80% of the Original actual Value | Annex-B and Annex -E |
| 16 | Ash Content Percent Max | 1 | 1 | Annex-F |
